Gecko: IN.YJ2 HEAT RECOVERY CONTROLS
Replacement Option For: HT-1000 & HT-2000 Series Controls
Control Bundle (1):
The Gecko IN.YJ2 Heat Recovery Controls are the new and improved replacement option for the HT-1000 & HT2000 series controls originally designed around our Heat Transfer/Heat Recovery Jacket. The Gecko IN.YJ2 controller can also be fitted and used on any spa with our patented pump motor Heat Transfer/Heat Recovery Jacket.
The Gecko IN.YJ2 controller can also be used as a replacement for other controls designed for our Heat Transfer/Heat Recovery System, including controls made by Balboa and TecMark (TDI).
Model: 52B Thermal Wrap- 2 Ports
Thermal Wrap Heat Jacket with Tubing and Clamps:
Model: 52B Thermal Wrap with Installation Kit - 2 Ports
Retro-fit kit for pumps without built on barbs.
This kit provides barbed unions, tubing and clamps to add a Thermal Wrap to your hot tub pump/motor.
Includes:
1 - 52B Thermal Wrap
32" - 3/8" Tubing
4 - Tubing Clamps
2 - Single Barbed Pump Unions: (1 1/2" socket x 3/8" barb) (for pump suction and discharge)
1 1/2" Slip x 3/8" Barb with O-rings
We are the manufacture of the Genuine Heat Recycling System
Designed for Spas - Hot Tubs and Whirlpool Bathtubs
It has been discontinued by the manufacture!
- Control: IN.Yj2 Heat Recovery with 15' GFCI Plug, 120 Volts, 3 Wire
- Topside: K-200 Digital with Temperature Readout
- Topside Adapter Plate
- Dual Heat & High Limit Sensor
- Mounting Brackets
- Light Cord with bulb socket (tub light fitting sold separately)
- Pump Cord Adapters: used with your existing pump cord - new pump cord sold separately
- Control: IN.Yj2 Heat Recovery with 15' GFCI Plug, 120 Volts, 3 Wire
- Topside: K-200 Digital with Temperature Readout
- Topside Adapter Plate
- Dual Heat & High Limit Sensor
- Mounting Brackets
- Light Cord with bulb socket (tub light fitting sold separately)
- Pump Cord Adapters: used with your existing pump cord - new pump cord sold separately
- Heat Recovery Jacket with Tubing & Clamps
- Control: IN.Yj2 Heat Recovery with 15' GFCI Plug, 120 Volts, 3 Wire
- Topside: K-200 Digital with Temperature Readout
- Topside Adapter Plate
- Dual Heat & High Limit Sensor
- Mounting Brackets
- Light Cord with bulb socket (tub light fitting sold separately)
- Pump Cord Adapters: used with your existing pump cord
- Heat Recovery Jacket with Tubing & Clamps
- Pump Cord
- Control: IN.Yj2 Heat Recovery with 15' GFCI Plug, 120Volts, 3 wire
- Topside: K-200 Digital with Temperature Readout
- Topside Adapter Plate
- Dual Heat & High Limit Sensor
- Mounting Brackets
- Light Cord with bulb socket (tub light fitting sold separately)
- Pump Cord Adapters: used with your existing pump cord
- Complete 1hp (1.5hp SPL) Pump/Motor with Pre-Installed Heat Recovery Jacket
- Pump Cord
Optional Light Kit
Includes:
- Clear Through Wall Fitting with Nut (fits 2 5/8" hole)
- Light Bulb Socket
- Colored Lens
2 Per Set - 1 1/2"
Feel free to give us a call and discuss your needs.
For Free Technical Support - Call Jim - 832-722-8412
may be needed to overlay existing cutout/hole if it's too large for new Gecko Topside.
Adapter Plate can be trimmed to size is needed.
- X-Spa-Dition
- X-Calibur
- Dreammaker Spas
- PDC Spas
- Freeflow Spas
- Softubs
- And many others
Mfg: Century
HP: 1 (1.5 SPL)
RPM: 3450
Single Speed
115 Volts
11.8 - 12 amps
HZ: 60
Frame: 56Z (48Y)
Thermally Protected
Pump Description:
Mfg: Vico/Balboa
1HP (1.5HP SPL)
1 1/2" Center Suction x Side Discharge (Center Discharge Available)
48 Frame
